User/Maintenance Instructions:

1. Make sure massager/heater is in OFF position.
2. Place foot massager/heater on floor.
3. Fill tub with warm water. The heat setting is designed to maintain the temperature of warm water, not to heat cold, or room temperature water.
4. Place Belava tub on top of the massager.
5. Plug massager into wall outlet. Attention: to eliminate splashing, do not fill tub with more than 1 and ½ gallons of water (approximately 2.5 inches deep). DO NOT fill Beleva tub to capacity.
6. Sit in a chair and place feet in the water. NEVER stand in the foot spa.
7. Turn Belava massager/heater on by pressing the ON/OFF button and select setting on the touchpad located on the unit.
8. Select one or a combination of the settings: Massage and Heat (combination High/Low of vibration and heat), Heat Only (High/Low), Massage Only (High/Low)
9. To turn off, simply press the OFF button on the touchpad.
10. Belava massager/heater can also be used as a dry foot massager when used without water. Attention: use heat on low setting for dry use (without Belava Tub) to prevent burning.

Touchpad controls combine custom settings:

1. ON/OFF (OFF will turn unit off and reset previous setting)
2. Heat
   • Press heat button one time for LOW (LOW heater light illuminated)
   • Press heat button two times for HIGH (HI heater light illuminated)
   • Press heat button three times to turn Heat OFF (Heater light is off)
3. Massage
   • Press vibration button one time for LOW (LOW vibration light illuminated)
   • Press vibration button two times HIGH (HI vibration light illuminated)
   • Press vibration button three times for Power Massage (both HI and LOW vibration light are illuminated). Attention: Power Massage setting is not recommended for use with the Belava tub. Power Massage setting may cause water to splash.
   • Press vibration button four times to turn vibration OFF.

Important Safety Instructions:

• Please read all instructions that come with the product before using this appliance.